Quick Specs
Max Lift Capacity
2500 KG
Engine Power
64.4 LPM
Max Lift Height
5.85 M
Battery Specification
309V/150AH
NEW ELLECTRIC TELEHANDLER
The XCMG XT2506E is a fully electric telehandler built to move up to 2,500 kg to a reach of nearly 6 metres — all on a 309V / 150Ah battery that keeps you working without a drop of diesel. Engineered for construction, agriculture, and material handling, it pairs the lifting muscle of a conventional machine with the quiet, clean, low-cost running of an electric drivetrain.
WHY CHOOSE THE XT2506E TELEHANDLER?
- Serious lifting, zero emissions: 2,500 kg capacity and 5.85 m reach, with no exhaust, engine noise, or fuel bills.
- Lower cost per hour: electricity costs a fraction of diesel, and far fewer moving parts mean less maintenance — no oil changes, no filters, no fuel system.
- Fast, flexible charging: overnight 380VAC / 32A or 200A fast charging, with a 150Ah standard or 228Ah optional battery for extended runtime.
- Strong, responsive performance: 70 kW travel and 50 kW work motors, 24.9 km/h top speed, ≥32 kN traction, and quick boom cycles.
- Agile in tight spaces: 4×4 drive and 4-wheel steering deliver a ≤3,310 mm turning radius, plus ±9° frame leveling for stability on slopes.
- Operator-focused cab: heating and cooling A/C, air-suspension seat, 8″ main display, and multifunction proportional controls.
- Safe by design: FOPS and ROPS certification, anti-tip system, seat-belt detection, rear-view camera, and a wet brake system.
- Ready for any job: quick-change mount
MACHINE SPECIFICATIONS
Key Performance Specs
| Max. lifting capacity: | 2500 kg |
| Max. lifting height: | 5.85 m |
| Lift capacity at maximum height: | 2,000 kg |
| Max. outreach: | 3.43 m |
| Lift capacity at maximum reach: | 860 kg |
| Load center to carriage: | 500 mm |
| Max. traveling speed: | 24.9 km/h |
| Max. traction force: | ≥32 kN |
| Min. turning radius: | ≤3,310 mm |
Additional Specs
| Battery: | 309V / 150Ah (std) · 309V / 228Ah (opt) |
| Charging: | 380VAC / 32A (slow) · 200A (fast) |
| Main Pump Type: | Rexroth |
| Drive mode: | 4 x 4 |
| Hydraulic pressure: | 28 MPa |
| Hydraulic flow: | 100 L/min |
| Total weight (with fork): | 5,100 kg |
| Traveling motor: | 70 kW / 309V |
| Working motor: | 50 kW / 309V |
KEY MACHINE FEATURES
Fast, smooth boom cycles
Precision hydraulics driven by a 100 L/min piston pump at 28 MPa keep every movement quick and controlled:
Boom up: ≤7.5 s
Boom down: ≤5.5 s
Boom extend: ≤4.8 s
Boom retract: ≤3.5 s
Fork tilt (up/down): ≤3.2 s
A boom luffing range of -2° to 68° and carriage tilt of -12° to 117° give operators the flexibility to load, place, and dump with confidence.
Electric drive, serious muscle
Twin motor architecture — a 70 kW traveling motor and a 50 kW working motor, both running at 309V — delivers a top speed of 24.9 km/h and ≥32 kN of traction force. That’s the pulling power to work loaded on uneven, demanding ground, with instant torque and none of the noise, heat, or emissions of a combustion engine.
The standard 309V / 150Ah battery can be upgraded to 309V / 228Ah for extended runtime. Charging is flexible too — 380VAC / 32A slow charging or 200A fast charging to get the machine back to work quickly.
Built to maneuver
4×4 drive and 4-wheel steering with a multi-mode steering function bring the turning radius down to ≤3,310 mm, making the XT2506E remarkably agile in tight yards and busy sites. A ±9° frame leveling system keeps loads stable on slopes and rough terrain.
